How To Repair Leaky Danco Lavatory Handle

How to Repair a Leaky Two-Handle Faucet

Step-past-pace Instructions

Is anything more abrasive than a leaky faucet? Perchance not; But it'south likewise well inside your ability to fix it yourself with Danco. Read on, to detect out how.

Tools and supplies required: Flat head screwdriver, Phillips head screwdriver, wrench, seat removal tool (optional)

1

Offset, determine the source of the leak. If water is leaking from underneath the handle onto the counter, the stem of whichever handle is leaking needs to be replaced.

If water is dripping from the faucet, plow off the hot h2o supply valve under the sink. If water is still dripping, you lot need to supplant the common cold stem (right handle). If the h2o stops dripping when you turned off the hot water valve, y'all need to replace the hot stem (left handle). Once yous've adamant the trouble stem, plow off the h2o supply.

2

Remove the Handle by lifting off the Alphabetize Cap with a flathead screwdriver. Next, Remove the handle (so the stem is visible) past loosening the Gear up Screw past the spiral counter-clockwise. Prepare aside the Handle, Set Screw and Handle Push to reinstall at the end of the projection.

three

If you have a plastic stem, unscrew the top cap and pop out the stalk. If you have a brass stem, remove the stem by using a wrench and rotating it counter clockwise until it threads out entirely. Take a look at the Washer which is located on the lower end of the Stem. If the Washer is squeezed apartment or has a groove worn in information technology, a Washer Kit coupled with a new Faucet Seat volition likely solve your problem. When replacing the faucet seat, you can remove and supercede the seat with an Allen wrench or a seat removal tool. Plow the seat counterclockwise to loosen, clockwise to tighten.

Once removed, you will need to take your stem to your local domicile improvement store and use the Perfect Match locator system from Danco or use the online Stem Finder. This system makes it easy to observe your replacement.

4

Once you accept purchased your new stalk, you lot can install it into your faucet

• Install a contumely stalk past rotating clockwise until it threads entirely and tighten with a wrench.
• Install a plastic stem by placing the stem into the handle base of operations and screw on the top cap.

five

At present is a great time to upgrade your faucet's appearance with universal metal handles.

How to install the new universal handles

• Place the handle adapter over the stem and tighten
• Place the new handle on the adapter and insert the handle screw into the washer then into the handle and tighten.
• If your new handle has an index push, place information technology on the handle.

Finally, turn the water back on to ensure the leak is stock-still.

Source: https://www.danco.com/how-to-guide/how-to-repair-a-leaky-two-handle-faucet/

Posted by: briggssheining1946.blogspot.com

Share this post